Generated SNMP Traps

SNMP Traps with fixed trap codes are generated by AE so that the management system actively informs about status changes or special conditions of AE. In addition to the Trap, the Automation Engine for Windows can generate an event which is displayed in the application log of the Windows Event Viewer. This requires the parameter snmp=2 to be set in the AE INI file.

Note: The file used by the AE for SNMP traps is called UC4Vers2-MIB.mib and it is located in the bin folder of the installation directory of the SNMP Agent, see Installing SNMP.

This page includes the following:

Trap Code 3400 - Automation Engine started

  • Description: Automation Engine started
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system"."Name of the Automation Engine"
  • AgentWorkInteger1: Status of the Automation Engine:
    • 1 = running
  • AgentWorkInteger2: Run mode of the Automation Engine:
    • 1 = Primary
    • 3 = Normal
    • 4 = Communication process

Trap Code 3401 - Automation Engine terminated

  • Description: End of a work of dialog process (regardless of the reason) or normal end of the primary work process
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject:"Name of the AE system"."Name of the Automation Engine"
  • AgentWorkInteger1: Status of the Automation Engine:
    • 2 = Ended normally
  • AgentWorkInteger2: Run mode of the Automation Engine:
    • 1 = Primary
    • 3 = Normal
    • 4 = Communication process

Trap Code 3410 - Automation Engine ended abnormally

  • Description: Primary work process (PWP) ended abnormally
  • Note: In addition to the Trap, an event is always generated in the application log of the Windows Event Viewer. This entry to the application log is even made when snmp=2 has been defined.
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system"."Name of the Automation Engine"
  • AgentWorkInteger1: Status of the Automation Engine:
    • 2 = Signal for abnormal end received
    • 3 = any other abnormal termination
  • AgentWorkInteger2: Run mode of the Automation Engine:
    • 1 = Primary
    • 3 = Normal
    • 4 = Communication process

Trap Code 3536 - Serious error when accessing the AE database. Access no longer possible.

  • Description: Serious error when accessing the database. Access no longer possible.
  • Note: This Trap is sent every 10 seconds until the database re-connects.
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system"."Name of the Automation Engine"
  • AgentWorkString1: Error text of the ODBC driver

Trap Code 3538 - Connection to the AE database re-established

  • Description: Connection to AE database re-established
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system"."Name of the Automation Engine"

Trap Code 11603 - Shutting down an agent

  • Description: Shutting down an agent
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system"."Name of the Automation Engine"."Name of the agent"."Type of the agent"
  • AgentWorkString1: Name of the agent
  • AgentWorkInteger1: Run mode of the Automation Engine:
    • 1 = Primary
    • 3 = Normal
    • 4 = Communication process

Trap Code 11604 - Cold start of an agent

  • Description: Cold start of an agent
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system"."Name of the Automation Engine"."Name of the agent"."Type of the agent"
  • AgentWorkString1: Name of the agent
  • AgentWorkInteger1: Run mode of the Automation Engine:
    • 1 = Primary
    • 3 = Normal
    • 4 = Communication process

Trap Code 11622 - Warm start of an agent

  • Description: Warm start of an agent
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system"."Name of the AE server"."Name of the agent"."Type of the agent"
  • AgentWorkString1: Name of the agent

Trap-Code 11650 - Connection to an agent disconnected

  • Description: Ends connection to an agent
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system"."Name of the Automation Engine"."Name of the agent"."Type of the agent"
  • AgentWorkString1: Name of the agent
  • AgentWorkInteger1: Run mode of the Automation Engine:
    • 1 = Primary
    • 3 = Normal
    • 4 = Communication process

Trap-Code 11652 - SAP Agent not longer connected to SAP system

  • Description: SAP Agent not longer connected to SAP system
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system"."Name of the Automation Engine"."Name of the agent"."Type of the agent"
  • AgentWorkString1: Name of the agent
  • AgentWorkInteger1: Run mode of the Automation Engine:
    • 1 = Primary
    • 3 = Normal
    • 4 = Communication process

Trap-Code 11662 - SAP Agent is reconnected to SAP system

  • Description: SAP Agent reconnected to SAP system
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system"."Name of the Automation Engine"."Name of the agent"."Type of the agent"
  • AgentWorkString1: Name of the agent
  • AgentWorkInteger1: Run mode of the Automation Engine:
    • 1 = Primary
    • 3 = Normal
    • 4 = Communication process

Trap Code 11801 - System error of the Automation Engine

  • Description: System error of the Automation Engine
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system"."Name of the Automation Engine"."Name of the kernel function"
  • AgentWorkString1: Text of the error message
  • AgentWorkInteger1: Number of the error message

Trap-Code 11818 - Primary server has changed

  • Description: Primary Server has changed
  • Note: Note
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system"."Name of the Automation Engine"
  • AgentWorkInteger1: Previous mode
  • AgentWorkInteger2: New mode

Trap Code 801450 - Message of a notification

  • Description: Message of a notification
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system"."Client"."RunID"
  • AgentWorkString1: Name of the notification
  • AgentWorkString2: Message text of the notification
  • AgentWorkInteger1: Status of the notification (as in the message file UC.MSL):
    • 1542 = Calling
    • 1553 = Accepted
    • 1556 = Escalated
    • 1800 = ENDED_NOT_OK - Aborted
    • 1850 = ENDED_CANCEL - Canceled
    • 1852 = Rejected
    • 1856 = ENDED_ESCALATED - Aborted by Escalation
    • 1900 = ENDED_OK - Ended normally
    • 1901 = Confirmed

Aside from the SNMP Traps generated by the system, user-defined Traps can be generated with the script statement :SEND_SNMP_TRAP. Trap codes generated by AE and the AE.Connect for HP OpenView NNM (Trap codes: 10000 - 10010) cannot be used as user-defined SNMP Traps.

Trap Code xxxxxx - User-defined SNMP Traps

  • Description: User-defined SNMP Traps
  • AgentWorkSysID: Name of the AE system
  • AgentWorkObject: "Name of the AE system". "Name of the Automation Engine"
  • AgentWorkString1 to AgentWorkString5: User-defined
  • AgentWorkInteger1 to AgentWorkInteger5: User-defined

See also:

MIB - Management Information Base