|
U00020600 |
Runtime error in object '&01', line '&02'. Invalid SYNC object '&04'.
|
|
|
U00020601 |
Runtime error in object '&01', line '&02'. Invalid ACTION '&04' for Sync object: '&05'.
|
|
|
U00020602 |
Runtime error in object '&01', line '&02'. Invalid ELSE condition for Sync object. Use: [W]ait, [A]bend, [S]kip.
|
|
|
U00020603 |
Warning: SET_SESSION_SETTING: Invalid USER_TZ: '&02' for user: '&01' - client time zone: '&03' is set for this user.
|
|
|
U00020604 |
Runtime error in object '&01' line '&02': ATTACH_SYNC is not possible for 'generation at runtime', in this case the Sync checks are done before running the script.
|
|
|
U00020605 |
Runtime error in object '&01' line '&02': Parallel running of x-gen-temp-table is invalid.
|
|
|
U00020606 |
Runtime error in object '&01' line '&02': ATTACH_SYNC: The referenced object (RunID: '&04') is not active.
|
|
|
U00020607 |
Runtime error in object '&01' line '&02': ATTACH_SYNC: The referenced object (RunID: '&04') is in an invalid status ('&05') for ATTACH_SYNC.
|
|
|
U00020608 |
Runtime error in object '&01' line '&02': ATTACH_SYNC: The referenced object (RunID: '&04') cannot handle NEXT_OBJECT because it is not a Workflow object.
|
|
|
U00020609 |
Runtime error in object '&01' line '&02': ATTACH_SYNC: The referenced object (RunID: '&04') cannot handle NEXT_OBJECT because there is no active successor.
|
|
|
U00020610 |
Runtime error in object '&01' line '&02': ATTACH_SYNC: The referenced object (RunID: '&04') cannot handle NEXT_OBJECT because there is more than one successor.
|
|
|
U00020611 |
Runtime Error in object '&01' line '&02': Object (OH_Idnr '&04') was not found.
|
|
|
U00020612 |
Runtime Error in object '&01' line '&02': Maximum length for LONG_SQL exceeded (1500).
|
|
|
U00020613 |
Runtime error in object '&01', line '&02'. Object '&04' was not from host type '&05'.
|
|
|
U00020614 |
Runtime error in object '&01', line '&02'. Object '&04' from type '&05' not found.
|
|
|
U00020615 |
Runtime error object with RunID ('&01') could not be found.
|
|
U00020616 |
Workflow/Schedule Result original values (RunID '&01', Lnr '&02') : rwhen '&03', rexecute '&04', relse '&05', rrepmtimes '&06', rrepwait '&07', rexecflag '&08'.
|
|
|
U00020617 |
Workflow/Schedule Result new values (RunID '&01', Lnr '&02') : rwhen '&03', rexecute '&04', relse '&05', rrepmtimes '&06', rrepwait '&07', rexecflag '&08'.
|
|
|
U00020618 |
Runtime error in object '&01', line '&02'. Object not found. (RunID '&04', Lnr '&05')
|
|
|
U00020619 |
Runtime error in object '&01', line '&02': Attribute '&04' not valid !
|
|
|
U00020620 |
Runtime error in object '&01' line '&02'. For attribute '&04' no valid user/group ('&05') defined !
The indicated User or UserGroup does not exist.
|
|
|
U00020621 |
Runtime error in object '&01' line '&02'. Attribute '&04' is only for use in Notifications!
|
|
|
U00020622 |
Runtime error in object '&01' line '&02'. No valid calendar ('&05') defined for attribute '&04'!
The Calendar object does not exist.
|
|
|
U00020623 |
Runtime error in object '&01' line '&02'. No valid keyword ('&04') defined for calendar ('&05')!
The Calendar keyword does not exist in the specified Calendar object.
|
|
|
U00020624 |
Operator '&01' was inserted with ADD_ATT!
|
|
U00020625 |
Operator '&01' was deleted with REMOVE_ATT!
|
|
|
U00020626 |
Runtime error in object '&01', line '&02'. Program error at: '&04' - please contact Automic Support. Additional Info: '&05'.
|
|
|
U00020627 |
It has been tried to send unread security-/admin messages to user-id '&01', even though no user with this user-id was logged on.
This is an indication for a possible program error. Please contact the Support.
|
|
|
U00020628 |
Runtime error in object '&01', line '&02'. Object '&04' was not found.
|
|
|
U00020629 |
Runtime error in object '&01', line '&02'. There is no corresponding last statistical record for the object '&04'.
|
|
|
U00020630 |
Runtime error in object '&01', line '&02'. Invalid keyword '&04'. Valid values are 'LAST' or a certain RunID.
|
|
|
U00020631 |
Runtime error in object '&01', line '&02'. Invalid RESTART-Flag '&04'. Valid values are 'GEN_JCL', 'ORIGINAL_SCRIPT', 'VAR_MOD', 'ATT_MOD', 'ATT_DIALOG', 'MAN_RELEASE', 'KEEP_STARTTYPE'.
|
|
|
U00020632 |
Runtime error in object '&01'. No execution access right for login object '&04' in Job '&05' (RunID '&06').
|
|
|
U00020633 |
Runtime error in object '&01', line '&02'. Reading the password is not permitted.
|
|
|
U00020634 |
Runtime error in object '&01', line '&02'. Reading the '&04' table is not permitted.
|
|
|
U00020635 |
Runtime error in object '&01', line '&02'. Object '&04' has no 1:n relation to the table '&05'.
|
|
|
U00020636 |
Runtime error in object '&01', line '&02'. Table '&04' is not a child table of object '&05'!
|
|
|
U00020637 |
Runtime error in object '&01', line '&02'. There is no field with the name '&04'.
|
|
|
U00020638 |
Runtime error in object '&01', line '&02'. Type '&04' of Field '&05' is not supported. Valid field types are: byte, integer, long, double, string, memo, date.
|
|
|
U00020639 |
Runtime error in object '&01', line '&02'. There is no activation with RunID '&04'. LastMsgNr or LastMsgInsert cannot be supplied.
|
|
|
U00020640 |
Runtime error in object '&01', line '&02'. No valid data type '&04' was entered!
|
|
|
U00020641 |
Runtime error in object '&01', line '&02'. The scope '&04' is not valid.
|
|
|
U00020642 |
Runtime error in object '&01', line '&02'. System name '&04' is invalid.
|
|
|
U00020643 |
Runtime error in object '&01', line '&02'. Object RunID/Name '&04' was not found.
null
|
|
|
U00020644 |
Runtime error in object '&01', line '&02'.: An object with the name '&04' already exists.
Explanation: Object names must only be assigned once. Refer to the UC4 User Manual (chapter UC4 Explorer) for further information. &01 = Name of the object &02 = Number of the script line &04 = Invalid object name
|
|
|
U00020645 |
Runtime error in object '&01', line '&02': There is no object '&04'.
|
|
|
U00020646 |
User ('&02') removed object '&01' via script.
Explanation: Use the script element REMOVE_OBJECT to delete objects.
|
|
|
U00020647 |
Object '&01' was created by script from user: ('&02').
You can create calendar, login and variable objects with the script element CREATE_OBJECT.
|
|
|
U00020648 |
Runtime error in object '&01', line '&02'. Division by zero!
Explanation: Divisions by 0 are impossible. Solution: Check before starting the division if the second operand is 0. :IF &NUMBER2# <> 0 : SET &RESULT# = DIV(&NUMBER1#, &NUMBER2#) :ELSE : P "Dividing by 0 is impossible!" :ENDIF
|
|
|
U00020649 |
Runtime error in object '&01', line '&02'. Destination folder '&04' not found!
|
|
|
U00020650 |
Object '&01' was moved to folder '&03' by user: ('&02').
|
|
|
U00020651 |
Runtime error in object '&01', line '&02'. MODIFY_OBJECT cannot be executed because a value has already been saved in the variable!
If a Variable object already contains values, it may not be modified anymore.
|
|
|
U00020652 |
Runtime error in object '&01', line '&02'. Value for 'Not found' is not E or I.
|
|
|
U00020653 |
Runtime error in object '&01', line '&02'. Time has a wrong format ('HH:MM:SS') '&04'
|
|
|
U00020654 |
Runtime error in object '&01', line '&02'. Number '&04' is to high for correct calculation.
Reason: The result of an arithmetic operation exceeds the maximum value of "9 999 999 999 999 999".
|
|
|
U00020655 |
Object '&01' was modified by user : ('&02').
|
|
|
U00020656 |
Runtime error in object '&01', line '&02'. WARNING! Function SET_SESSION_SETTINGS('&06') was called for user: '&04', client: '&05' - this has to be a PRIMARY message, no SESSION_SETTINGS changed.
|
|
|
U00020657 |
Runtime error in object '&01', line '&02'. Destination folder '&04' not found.
Explanation: The folder must already exist, it is not newly created. Solution: * Select an existing folder * Create a folder with the required name &01 = Name of the object &02 = Number of the script line &04 = Invalid folder
|
|
|
U00020658 |
Runtime error in object '&01', line '&02'. Maximum length for filter item/value (200/255) exceeded!
|
|
|
U00020659 |
Runtime error in object '&01', line '&02'. Object '&04' not from type JOBP/JSCH!
|
|
|
U00020660 |
Runtime error in object '&01', line '&02'. Invalid character '&' in XML, position '&04'. Affected Text: '&05'
|
|
|
U00020661 |
Runtime error in object '&01', line '&02'. Syntax error at DS_INCL: Variable name '&06' (object: '&04') not allowed, cause a variable with the name '&07' (object: '&05') already exists. Contact development: LF or MH.
An internal error occurred. Please contact support.
|
|
|
U00020662 |
Runtime error in object '&01', line '&02'. Workflow/Scheduler task with serial number '&04' not found!
|
|
|
U00020663 |
User '&02' has initiated disconnection from host '&01'.
The Agent reconnects to the UC4 Server as soon as the next signal for Agent testing is sent. Disconnecting an Agent connection is reasonable when a new communication process is started and the Agents should rearrange themselves.
|
|
|
U00020664 |
Runtime error in object '&01', line '&02'. Combination JOBP/JSCH '&04' with LNR '&05' not found.
|
|
|
U00020665 |
Runtime error in object '&01', line '&02'. Maximum list of calendar condition (5) exceeded ! Currently, up to 5 conditions are worked on.
|
|
|
U00020666 |
<UC4> SHUTDOWN initiated by '&01'.
|
|
|
U00020667 |
Host '&01' was terminated by user: '&02'.
|
|
|
U00020668 |
Command: '&01' could not reach process: '&02'. Process not found or not active.
|
|
|
U00020669 |
Shutdown was not carried out because the keyword UC4 is missing!
Explanation: The script statement is correctly spelled :SHUTDOWN UC4.
|
|
|
U00020670 |
Runtime error in object '&01', line '&02'. Invalid calendar validity (sequence <from>, <to>)
Explanation: The chronological order must be correct. Example: 01.05.2004 - 31.05.2005; 31.05.2004 - 01.05.2004 would be invalid. &01 = Name of the object &02 = Number of the script line
|
|
|
U00020671 |
Runtime error in object '&01', line '&02'. Cannot open XML Docu ('&04'/'&05'), because it does not contain a valid XML.
|
|
|
U00020672 |
Runtime error in object '&01', line '&02'. XML Docu name for object ('&04') is not set.
|
|
|
U00020673 |
Email-address '&01' was inserted with ADD_ATT!
|
|
|
U00020674 |
Runtime error in object '&01', line '&02': The attribute '&04' is not valid for this type of connection object.
|
|
|
U00020675 |
Runtime error in object '&01' line '&02': Connection object '&04' is not of type SQL.
|
|
|
U00020676 |
Task '&01' with RunID '&02' couldn't be deactivated, because a task cannot deactivate itself out of its script.
|
|
|
U00020677 |
Runtime error in object '&01' line '&02': column '&04' invalid.
|
|
|
U00020678 |
Runtime error in object '&01', line '&02'. XML_WRITE_DOCU: Cannot access object: '&04' because it is opened by user: '&06' since: '&05'.
|
|
|
U00020679 |
Runtime error in object '&01' line '&02': The provided type '&04' is not allowed.
|
|
|
U00020680 |
Unknown Part '&01' of VERSION in function SYS_INFO.
|
|
|
U00020681 |
Runtime error in object '&01', line '&02': GET_PROCESS_LINE is not accepted outside a PROCESS END_PROCESS block
|
|
|
U00020682 |
Could not unblock task '&01' (RunID: '&02'). Only workflows and workflow tasks can be unblocked.
|
|
|
U00020683 |
Runtime error in object '&01', line '&02', PUT_VAR_PROCESS: A validity keyword was used multiple times. The first usage was saved, the duplicates rejected.
|
|
|
U00020684 |
Runtime error in object '&01', line '&02': data sequences couldn't be joined, because their types are different.
|
|
|
U00020685 |
Runtime error in object '&01' line '&02': Data type '&04' not supported
|
|
|
U00020686 |
Runtime error in object '&01', line '&02'. Array '&04' with length '&05' already exists.
|
|
|
U00020687 |
Runtime error in Object '&01' line '&02': the name of element: '&04' is not valid.
|
|
|
U00020688 |
Runtime error in object '&01', line '&02': Empty filename in :PUT_ATT FT_SRC_FILE and FT_DST_FILE are not allowed.
|
|
|
U00020689 |
:SHUTDOWN did not perform any action. the keyword UC4 is missing.
Explanation: The script statement is correctly spelled :SHUTDOWN UC4
|
|
|
U00020690 |
Runtime error in object '&01', line '&02'. The keyword '&04' is invalid for the function 'GET_CLIENT_SETTINGS' .
|
|
|
U00020691 |
Runtime error in object '&01', line '&02'. Cannot run :IMPORT. File: '&04' / '&05'KB exceeds maximum size of: '&06'KB. (max. size settable through UC_SYSTEM_SETTINGS, contact your administrator).
|
|
|
U00020692 |
Runtime error in object '&01', line '&02'. Error when reading the file: '&04'. Error message: '&05'.
|
|
|
U00020693 |
Runtime error in object '&01', line '&02'. EXPORT: No object matched your selection: '&04'.
Explanation: Exporting is not possible because there are no objects of this name. Solution: Adjust the object name &01 = Name of the object &02 = Number of the script line &04 = Invalid specification of object
|
|
|
U00020694 |
Runtime error in object '&01', line '&02'. Maximum number of objects to be exported (='&06') would have been exceeded. The selection filter: '&04' returns '&05' hits! (The max. export number can be set in UC_SYSTEM_SETTINGS, contact your administrator).
|
|
|
U00020695 |
Runtime error in object '&01', line '&02'. Cannot open XML docu, because another XML docu has already been opened.
|
|
|
U00020696 |
Runtime error in object '&01', line '&02'. XML docu: '&04' for object: '&05' not found.
|
|
|
U00020697 |
Runtime error in object '&01', line '&02'. Object: '&04' not found.
|
|
|
U00020698 |
Runtime error in object '&01', line '&02'. User/UserGroup '&04' not found!
|
|
|
U00020699 |
UserGroup was inserted with '&01' ADD_ATT !
|