Start Parameters - Utilities

This topic lists the parameters that administrators can use to start the different AE utilities in batch mode. You can either use the Java loader or the utility to assign them.

This page includes the following:

Overview

An authorization check for single login takes place when you call the utilities AE DB Client Copy, AE DB Archive, or AE DB Reorg in batch mode. For more information, see AE DB Client Copy, AE DB Archive, or AE DB Reorg.

Example

The utility aborts if there is no User object for the OS user that logged into the AE system. This check is always made even if the system variable UC_USER_LOGON includes all relevant entries. Single login provides increased security in batch mode. If a program starts with the Automic Web Interface, single login increases the ease of use. For more information, see UC_USER_LOGON - Single Logon.

Windows

By default, utilities start in batch mode when you use the corresponding *.EXE files. Files that end on *G.EXE start the utilities in normal mode. Despite this, you can assign parameters to *G.EXE files.

Example You want to call a specific INI file. The parameter -B must not be used in such a case.

Unix

By default, utilities start in batch mode when you use the corresponding *.sh files. Files without file ending can be used to assign start parameters for the batch calls.

Java Loader

Program: Java Loader

The following start parameters are available:

  • -F0File name
    Suppresses the splash screen
  • -IPath and File name
    Path and name of the INI file for the Java loader
  • -JParameter
    Parameter of the utility

    • You can use the Java loader to assign parameters to the utility as shown below. These parameters are added to the cmd section in the INI file. This means that you can specify a default setting in the INI file and handle specific situations via the Java loader.

    It is mandatory to use double quotations for

    • the parameter chain
    • path indications that include blanks.

      • Example:

      -J"-I""C:\AUTOMIC\my utilities\UCYBDBAR.ini"""

Examples

Set the language by using a shortcut :

cmd="javaw" -jar -cp .;.\UC4LAF.jar UCYBDBar.jar

Pre-determine the language by using a shortcut:

UCYBDBarg.exe -F0 -J"-LD"

If you define an INI file for the utility, you must use the parameter -I twice, even if the Java loader and the utility use the same INI file.

Java loader and utility use the same INI file:

ucybdbccg -IUCYBDBCC.ini -J"-IUCYBDBCC.ini"

Different INI files are used:

ucybdbccg -IUCYBDBCC.ini -J"-Iclientcopy.ini"

AEDB Archive

This utility archives messages, reports and statistics. For more information, see AE DB Archive.

Syntax

  • Archive Mode

    • UCYBDBAR [-V[Path and file name]] [-IFile name] [-LLanguage] -B -Smmmm

  • Report Mode

    • UCYBDBAR [-V[Path and file name]] [-IFile name] [-LLanguage] -B -Smmmm -XMode

    UCYBDBAR [-V[Path and file name]] [-IFile name] [-LLanguage] -B -Smmmm -Xlist [-OPath and Filename] [-YNumber]

    UCYBDBAR [-V[Path and file name]] [-IFile name] [-LLanguage] -B -Smmmm -Xunload [-OPath and Filename] [-YNumber] -RRunID [-TTimezone] [-TYReport type]

    UCYBDBAR [-V[Path and file name]] [-IFile name] [-LLanguage] -B -Smmmm -Xmark -RRunID [-TYReport type]

    UCYBDBAR [-V[Path and file name]] [-IFile name] [-LLanguage] -B -Xreport -NObject [-T1yyyymmddhhmmss] [-T2yyyymmddhhmmss] [-PPath and file prefix]

Program: UCYBDBAR

The following start parameters are available:

  • -V
    Prints the Automation Engine version and hotfix number in the following format:

    • UCYBDBar version Automation Engine version plus hotfix number

  • -VPath and file name
    Prints the Automation Engine version and hotfix number to the specified file in the following format:

    • UCYBDBar version Automation Engine version plus hotfix number

  • -IFile name
    Path and the name of the INI file
  • -LLanguage
    Language parameter
    Allowed values: D (German, E (English), F (French)

    The language that is specified in the INI file is used if you do not specify this parameter.

  • -B
    Batch mode

In Archive Mode:

  • -Smmmm
    Number of the client that should be archived

    • Important! This client must include a User object for the user who starts this utility in batch mode.

    Example: There must be the User object SMITH/department name for the OS user Smith. Note that no other User object must start with SMITH. It is not possible to use SMITH/AE and SMITH/TEST.

  • -Dmmmm
    (Windows only) The number of the client that should be archived

    • Important! This client must include a User object for the user who starts this utility in batch mode.

    Example: There must be the User object SMITH/AE for the OS user SMITH of the domain AE.

In Report Mode:

  • -Smmmm
    -Dmmmm
    In report mode, you must always define a client, except for -Xreport. The same rules apply for the parameters -S and -D as in archiving mode.

    • Depending on the report mode that you use, the client specification can have different meanings:

    • -Xlist
      The client whose reports should be listed
    • -Xunload and -Xmark
      The client is used for checking login data. A User object must be available. Otherwise, the utility cancels the process.
  • -XMode
    Type of  report handling

    • For Output Management systems (see Open Interface to Output Management Systems ):

    • list
      Reports are listed
    • unload
      The report is unloaded
    • mark
      The report is flagged as archived and removed from the database table XRO.

    For combining log and trace files (see AE.LogMix - Combining Report, Log and Trace Files):

    • report
      Files are generated from the log entries of server processes
  • Parameter for -Xlist
    • -OPath and file name
      Path and name of the CSV file
      • If you do not specify a file name, the name uc_XROlist.csv is used.
      • If you do not specify a path, the file is stored in the folder in which the utility is stored.
    • -YNumber
      Filter for the report selection
  • Parameters for -Xunload
    • -OPath and file name
      Path and name of the text file

      • The dot character (.) is used as a separator between the file name and the extension. If the name contains several dot symbols, the last one will be regarded as a separator between the file name and the extension. The text after the dot will be handled as the file extension.

      A file with the additional suffix _Report type in the file-name part is created in the specified folder for each report of the task.

      Examples:

      -OOutputfile.txt -> Outputfile_ACT.txt

      -OOutputfile.job.name.txt -> Outputfile.job.name_ACT.txt

      -OOutputfile.job123456 -> Outputfile_ACT.job123456

      or generic:

      -OOutputfilename.extension (the last dot is used as extension separator) -> Outputfilename_ReportType.extension

      The name uc_XROreport_Report type.txt is used if you do not specify a file name. By default, the files are stored in the folder in which the utility is stored.

    • -YNumber
      Sets a number for later filtering
    • -RRunID
      RunID of the task
    • -TTimeZone
      Name of a Time Zone object

      • Default: Universal Time (UTC) is used in unloaded reports. You can use this parameter to convert the time specifications to other time zones.

      UTC is used if this Time Zone object does not exist in the specified client.

    • -TYReport type
      Type of the report (such as ACT)

      • All reports of the task are exported to a separate file if you do not specify a report type.

  • Parameters for -Xmark
    • -RRunID
      RunID of the task
    • -TYReport type
      Type of the report (such as ACT)

      • All report types are archived if this parameter is not specified. A separate file is created for each report type. Names end with _report type (such as _ACT).

  • Parameters for -Xreport
    • -NObject
      The name of an object or a filter that uses an asterisk symbol (*) for several objects.

      • Separate several specifications with commas.

    • -T1yyyymmddhhmmss
      The tart date and the time for the server reports that should be selected

      • Default: The current date and time 00:00:00

    • -T2yyyymmddhhmmss
      The end date and the time for the server reports that should be selected

      • Default: The current date and time

    • -PPath and file prefix
      Path and file prefix for the target file

      • Default: The target files obtain the prefix unload. They are stored in the utility folder.

      The file name is structured as follows: Prefix.object name_date_time.txt

Examples

Client 1 is archived.

UCYBDBar -B -S0001

The utility creates a report list and writes it to the file report01.csv.

UCYBDBar -B -Xlist -S1000 -OC:\AUTOMIC\REPORT\report01.csv

Report number 1791029 is unloaded to a text file and obtains the status 123.

UCYBDBar -B -Xunload -S1000 -R1791029 -Y123

AE DB Archive flags the report number 1791029 as archived and removes it from the database table.

UCYBDBar -B -Xmark -S1000 -R1791029

All server reports of March 15th, 2018 should be unloaded.

UCYBDBar -B -Xreport -N"UC4#CP*,UC4#WP*" -T120180315000000 -T220180315235959 -P"C:\AUTOMIC\report\server"

The utility unload reports of the work processes WP001 and WP002.

UCYBDBar -B -Xreport -N"UC4#WP001,UC4#WP002" -T120070315000000 -T220070315235959

AE DB Change

This utility changes objects that were transported with the Transport Case. For more information, see AE DB Change.

Syntax

UCYBCHNG [-V[Path and file name]] -B -1Script File -2Transport File [-3Output File] [-LLanguage]

Program: UCYBCHNG.EXE

The following start parameters are available:

  • -V
    Prints the Automation Engine version and the hotfix number in the following format:

    • UCYBChng version Automation Engine version plus hotfix number

  • -VPath and file name
    Prints the Automation Engine version and the hotfix number to the specified file in the following format:

    • UCYBChng version Automation Engine version plus hotfix number

  • -B
    Batch mode
  • -1Script File
    This file contains modification instructions (REPLACE).
  • -2Transport File
    Contains the original export data
    Default: UC_DATA.TXT
  • -3Output File
    Modified data is written to this file
  • -LLanguage
    Language parameter
    Allowed values: D (German, E (English), F (French)

    The language that is specified in the INI file is used if you do not specify this parameter.

Example

ucybchng -b -1c:\AUTOMIC\uc_change.txt -2c:\AUTOMIC\uc_transport.txt -3c:\AUTOMIC\uc_transport_new.txt

AE DB Client Copy

This utility copies and deletes clients. For more information, see AE DB Client Copy.

Syntax

  • Copy Mode

    • UCYBDBCC [-V[Path and file name]] [-IFile name] [-LLanguage] -B -C -Smmmm -Tmmmm -O [-M][-A][-R] [-V] [-W]

  • Delete Mode

    • UCYBDBCC [-V[Path and file name]] [-IFile name] [-LLanguage] -B -E -Smmmm

    UCYBDBCC [-V[Path and file name]] [-IFile name] [-LLanguage] -B -E -Tmmmm

Program: UCYBDBCC

The following start parameters are available:

  • -V
    Prints the Automation Engine version and the hotfix number in the following format:

    • UCYBDBcc version Automation Engine version plus hotfix number

  • -VPath and file name
    Prints the Automation Engine version and hotfix number to the specified file in the following format:

    • UCYBDBcc version Automation Engine version plus hotfix number

  • -IFile name
    Path and name of the INI file
  • -LLanguage
    Language parameter
    Allowed values: D (German, E (English), F (French)

    The language that is specified in the INI file is used if you do not specify this parameter.

  • -B
    Start in batch mode, single logon is used
  • -V
    Outputs the Automation Engine version and hotfix number

In Copy Mode:

  • -C
    Copies the client

    • Note: The OS user must exist as an AE user in both databases in system client 0000. Otherwise, the process aborts with an error message.

  • -Smmmm
    Number of the source client

    • Important: System client 0 must include a User object for the user who starts this utility in batch mode.

    Example: There must be the User object SMITH/department name for the OS user Smith. Note that no other User object must start with SMITH. It is not possible to use SMITH/AE and SMITH/TEST.

  • -Dmmmm
    (Windows only)      The number of the source client

    • Important: 

    • The parameters -D and -S must not be used together.
    • System client 0 must include a User object for the user who starts this utility in batch mode.

      • Example: There must be the User object SMITH/AE for the OS user SMITH of the domain AE.

  • -Tmmmm
    The number of the target client

    • The same requirements apply to the user as described for the parameter -S.

  • -O
    Copies objects
  • -M
    Copies messages
  • -A
    Copies statistics and reports
  • -R
    Resets password
  • -V
    Copies version objects
  • -W
    Deletes the work files after a successful copying process

In Delete Mode:

  • -E
    Deletes a client

    • Important! The OS user must exist as an AE user in both databases in the system client 0. Otherwise, the process aborts with an error message.

  • -Smmmm, -Dmmmm, -Tmmmm
    You can define different databases for the source and the target in the INI file.
    • -S or -D
      Deletes the client in the source database
    • -T
      Deletes the target database

    The same requirements apply for these parameters as in copy mode.

Examples

Copy client:

The objects, statistics and reports of client 38 are copied to the new client number 2:

UCYBDBcc -B -C -S0038 -T0002 -O -A

Delete client:

Client 2 is deleted in the target database.

UCYBDBcc -B -E -T0002

AE DB Load

This utility loads data to the database. For more information, see AE DB Load.

Syntax

  • Load the Transport Case / Initial Data

    • UCYBDBLD [-V[Path and file name]] [-IFile name] [-FFolder handling] [-LLanguage] -B -Cmmmm [-EMode] [-UName/Department] [-GName] [-AAccess] [-MAccess] -XFile name

  • Set the Authentication Method

    • UCYBDBLD [-V[Path and file name]] [-IFile name] [-LLanguage] -B -TAuthentication method-KCompany key string

Program: UCYBDBLD

The following start parameters are available:

  • -V

    Prints the Automation Engine version and the hotfix number

    Format: UCYBDBld version Automation Engine version plus hotfix number

  • -VPath and file name

    Prints the  Automation Engine version and hotfix number to the specified file

    Format: UCYBDBld version Automation Engine version plus hotfix number

  • -IFile name

    Path and name of the INI file

  • -FFolder handling

    Defines the behavior of DB Load regarding folders. When objects or linked objects are replaced, the data of the home folder and the linked objects of the Transport Case are kept.

    Allowed value: OT

    Important! When this value is set, the data that is included in the data file of the Transport Case will overwrite already existing objects in the Automation Engine database.

  • -LLanguage

    Language parameter

    Allowed values: D (German, E (English), F (French)

    The language that is specified in the INI file is used if you do not specify this parameter.

  • -B

    Batch mode

  • -ILM

    Install ILM

    • -N[X]

      Number of active partitions

    • -SAH_part1|AH_part2|AH_part3

      List AH partitions separated by |

    • -RRH_part1>RH_part2|RH_part3

      List RH partitions separated by |

    • -OMisc_part1|Misc_part2|Misc_part3

      List Misc partitions separated by |

    • -D

      Do switch in and keep existing statistical records in the system.

    Example

    ucybdbld.exe -B -ILM -N3 "-SAH_1|AH_2|AH_3" "-RRH_1|RH_2|RH_3" "-OMisc_1|Misc_2|Misc_3" -D -X..\db\general\12.0\UC_UPD.TXT

  • -Cmmmm

    The number of the client for processing

    • -C-1

      Keeps clients

    • -Cmmmm

      Loads the Transport Case to client mmmm

  • -EMode

    Processing mode for objects that exist already

    Note: Only available in batch mode

    Allowed values:

    • IGNORE The object is skipped (default)

      Important: IGNORE requires that the original object and the object that should be loaded are of the same type. Otherwise, processing will abort before the loading process starts.

    • ABEND Processing is canceled

    • REPLACE The existing object is replaced

  • -UName/Department

    The name and the department of a default user

    This default user can be used if a specific user does not have access rights on object level.

  • -GName

    The name of the default user group

    This default user group can be used if a specific user group does not have access rights on object level.

  • -AAccess

    Loads access authorizations on object level, see Authorizations Page

    Allowed values:

    • Y (default)

    • N Access authorizations on object level are not loaded

  • -MAccess

    Ignores access authorizations that refer to missing users and user groups

    Allowed values:

    • Y Ignores access authorizations for missing users and user groups. They are not loaded.

    • N (default) Cancels the loading process for access authorization of missing users and user groups

  • -XFile name

    The name of the file that should be loaded. This start parameter is obligatory.

  • -TAuthentication method and

    -KCompany key string Authentication details, see Agent Authentication

    Important! Only use the utility with these start parameters if you newly install without using the Automic Web Interface.

    Both parameters must be used together:

    • -T

      To set the authentication method

      Allowed values: NO, LOCAL, LOCAL_REMOTE

      To export a file that contains the authentication key:

      Allowed value: PACKAGE

    • -K Builds the company key

      Allowed values: Any characters

      Maximum length: 32

      Tip: Always specify a string for the company key even if you do not use authentication (-TNO). It is recommended to use the AE system name as the company key.

      Important!

      If the string includes special characters, you must specify it in quotation marks. If you intend to use a quotation mark within the string, set an additional quotation mark before it (Windows) or a "\" (Unix).

      Using these start parameters results in an error when the initial data is loaded for the first time. Use the utility to create the schema and then restart it to set the authentication details. For more information, see AE DB Load.

      Example:

      Step 1: java -jar ucybdbld.jar -B -XC:\AE\Utility\db\general\12.1\UC_UPD.TXT
      Step 2: java -jar ucybdbld.jar -B -TNO -Kabc

      Alternately, you can also use the graphical interface of the utility.

Examples

The file UC_DATA.TXT is loaded to client 11 and the existing objects are replaced.

UCYBDBld -B -C0011 -XC:\AUTOMIC\UTILITY\temp\UC_DATA.TXT -EREPLACE

The authentication method Server and Agent should be specified in the AE system.

UCYBDBld -B -TLOCAL_REMOTE -KUC4PROD

AEDB Reorg

This utility reorganizes messages, reports, statistics, and object versions. For more information, see AE DB Reorg

Syntax

UCYBDBRE [-V[Path and file name]] [-IFile name] [-LLanguage] -B -Smmmm

Program: UCYBDBRE

The following start parameters are available:

  • -V
    Prints the Automation Engine version and hotfix number in the following format:

    • UCYBDBre version Automation Engine version plus hotfix number

  • -VPath and file name
    Prints the Automation Engine version and hotfix number to the specified file in the following format:

    • UCYBDBre version Automation Engine version plus hotfix number

  • -IFile name
    Path and name of the INI file
  • -LLanguage
    Language parameter
    Allowed values: D (German, E (English), F (French)

    The language that is specified in the INI file is used if you do not specify this parameter.

  • -B
    Batch mode
  • -Smmmm
    The number of the client that should be reorganized

    • Important! This client must include a User object for the user who starts this utility in batch mode.

    Example: There must be the User object SMITH/department name for the OS user Smith. Note that no other User object must start with SMITH. It is not possible to use SMITH/AE and SMITH/TEST.

  • -Dmmmm
    (Windows only) The number of the client that should be reorganized

    • Important! This client must include a User object for the user who starts this utility in batch mode.

    Example: There must be the User object SMITH/AE for the OS user SMITH of the domain AE

Example

Client 98 is reorganized.

UCYBDBre -B -S0098

AE DB Reporting Tool

This utility facilitates user-defined AE queries. For more information, see AE DB Reporting Tool.

Syntax

UCYBDBRT [-IFile name] [-LLanguage] [-Cmmmm]-XPath and filename [-Ryyyymmdd[hhmm]] [-S] [-OPath and filename] [-TFile type]

Program: UCYBDBRT.EXE

The following start parameters are available:

  • -Cmmmm
    Client number for processing
    It overwrites the client that is specified in the query definition.
  • -XPath and file name
    TPath and the name of the XML file
  • -IPath and file name
    Path and the name of the INI file
  • -LLanguage
    Language parameter
    Allowed values: D (German, E (English), F (French)
  • -Ryyyymmdd[hhmm]
    Reference date for the analysis of statistics and forecasts

    • It overwrites the query definition.

    Tip: The entries of the AE database are stored in UTC. Therefore, use this time zone also for specifying the reference time.

  • -S
    Returns the number of output lines
  • -OPath and file name
    Path and name of the output file
  • -TFile type
    Type of the output file

    • Allowed values: CSV and HTML

Example

The query that is defined in the file jobtop10.d.xml is used to create an analysis for client 100.

UCYBDBRT -C0100 -XC:\AUTOMIC\Utilities\analyses\jobtop10.d.xml

AEDB Revision Report

This utility creates revision reports. For more information, see AE DB Revision Report.

Syntax

UCYBDBRR [-V[Path and file name]] [-IFile name] [-LLanguage] -B -Cmmmm [-OPath and filename] [-FType1,Type2,...] [-D1yyyymmddhhmmss] [-D2yyyymmddhhmmss] [-A] [-X]

Program: UCYBDBRR.EXE

The following start parameters are available:

  • -V
    Prints the Automation Engine version and hotfix number in the following format:

    • UCYBDBRR version Automation Engine version plus hotfix number

  • -VPath and file name
    Prints the Automation Engine version and hotfix number to the specified file in the following format:

    • UCYBDBRR version Automation Engine version plus hotfix number

  • -IPath and file name
    Path and name of the INI file
  • -LLanguage
    Language parameter
    Allowed values: D (German, E (English), F (French)

    The language that is specified in the INI file is used if you do not specify this parameter.

  • -B
    Batch mode
  • -Cmmmm
    Client number for processing
  • -OPath and file name
    Path and name of the revision report

    • Default: The report is stored as UCYBDBRRoutput.txt in the utility folder.

  • -FType1,Type2,...
    Handles the required contents of the auditing report. Indicate your preferred content types separated by commas.

    • Allowed values:

    • ACCESS
      Unauthorized access
    • CANCEL
      Aborts tasks
    • CREATE
      Creates new objects
    • DELETE
      Deletes objects
    • IMPORT
      Imports objects
    • MOVE
      Moves objects
    • OBJ_MOD
      Object modifications
    • RENAME
      Renames objects
    • RESTART
      Restarts tasks
    • RESTORE
      Restores objects
    • RUN_MOD
      Modifies at runtime
    • START
      Starts tasks
    • TRNSPRT
      Transports objects
    • USER
      Successful user logons and logoffs

    The utility outputs all contents to the revision report if you do not use this parameter, or if you use -F*.

  • -D1yyyymmddhhmmss
    Start date and time for logging

    • Default: The selection is not limited by a start time. It is recommended that you specify a start time, as otherwise the Revision Report will be very large.

    The time zone of the client is used. If the client does not include a time zone specification, the one of system client 0000 is used. If it does not include a time zone specification, UTC is used.

    All modification data is written to the report if the time parameters -D1 and -D2 are not used. The filters -F and -X are taken into account.

  • -D2yyyymmddhhmmss
    The end date and the time for logging

    • Default: Current date and time

    The time zone of the client is used. If the client does not include a time zone specification, the one of system client 0 is used. If it does not include a time zone specification, UTC is used.

    All modification data is written to the report if the time parameters -D1 and -D2 are not used. The filters -F and -X are taken into account.

  • -A
    Archive flags are set when you use this parameter. It is related to the parameter -X.

    • The start of tasks is retrieved from the statistical records, see start parameter -FSTART. Therefore, the utility cannot set archive flags for these data records.

  • -X
    Use this parameter to have only modification entries that have never been output by the utility before written to the report such as entries that do not have archive flags.

Examples

All revision information of client 1 between 01.05 00:00 and the current date are output to a report.

UCYBDBRR -B -C0001 -O/uc4/reports/report01.txt -D120170501000000

All start and restart points between 01.10. 08:00 and 01.10. 12:00 are output in a report.

UCYBDBRR -B -LD -C0100 -FSTART,RESTART -D120171001080000 -D220171001200000

AE DB Unload

This utility unloads data. For more information, see AE DB Unload.

Syntax

UCYBDBUN [-V[Path and file name]] [-IFile name] [-LLanguage] -BMode [-D][-Cmmmm] [-XFile name] [-K]

Program: UCYBDBUN

The following start parameters are available:

  • -V
    Prints the Automation Engine version and hotfix number in the following format:

    • UCYBDBun version Automation Engine version plus hotfix number

  • -VPath and file name
    Prints the Automation Engine version and hotfix number to the specified file in the following format:

    • UCYBDBun version Automation Engine version plus hotfix number

  • -IFile name
    Path and name of the INI file
  • -LLanguage
    Language parameter
    Allowed values: D (German, E (English), F (French)

    The language that is specified in the INI file is used if you do not specify this parameter.

  • -BMode
    Batch mode and processing mode

    • AE system-wide:

    • NORMAL
      All data from all database tables is unloaded.
    • INITIAL
      Data is taken from client 0. Only initial data such as XREQs is unloaded.
    • DEFAULT
      Default data of the system is unloaded (such as client 0, initial user and user group).
    • REPAIR
      The folder structure of the Explorer is checked and repaired.

    AE system-wide and client-wide:

    • REORG
      The database is reorganized.
    • TRANSPORT
      The Transport Case is unloaded.
    • TRANSPORTALL
      All objects are transported. To remove objects from the Transport Case after the unloading process, use -D.
    • RESETARCHIVE
      Archive flags are reset, see AE DB Archive
    • RESETREORG
      Deletion flags are reset, see AE DB Reorg
  • -D
    This start parameter removes all objects from the Transport Case after the unloading process.
  • -Cmmmm
    Number of the client that is used to unload the Transport Case

    • All clients are unloaded if you do not define a client here.

    Important! You cannot unload client 0. Even if you use -C0, all clients will be unloaded except for client 0.

  • -XFile name
    The name of the file that should receive the unloaded data

    • If you do not use this parameter, the utility uses the name and path of the file that is specified in the output = parameter of its INI file.

    Important! You cannot use this parameter with the mode -BREORG because these specific files are subject to a given naming convention.

  • -K
    Setting this parameter has the effect that deleted objects are still available in the Recycle Bin after the unloading process.

Examples

The AE database is reorganized.

UCYBDBun -BREORG

The Transport Case of client 11 is unloaded and the utility uses the path and file names that are specified in the OUTPUT= section of the utility's INI file. The Transport Case is cleared afterward.

UCYBDBun -BTRANSPORT -D -C0011

The utility has sent the message U0021148 which refers to error in the folder structure of a client. Therefore, you want to call the correction function.

UCYBDBun -BREPAIR

AE.LogMix

This utility combines reports, logs and trace files. For more information, see AE.LogMix - Combining Report, Log and Trace Files.

Syntax

UCYBLGMX [-V[Path and filename]] -B-LPaths and names of log and trace file -FPath and name of the target file

Program: UCYBLGMX

The following start parameters are available:

  • -V
    Outputs the Automation Engine version including the hotfix number in the following format:

    • UCYBLGMX version Automation Engine version plus hotfix number

  • -VPath and file name
    Prints the Automation Engine version and hotfix number to the specified file in the following format:

    • UCYBLGMX version Automation Engine version plus hotfix number

  • -B
    Batch mode
  • -LPaths and names of log and trace file
    The log files and the trace files that should be integrated in a target file

    • There are two options to define the files:

    • Path file1, file2, file3
      The path that is used for the first file will also be used for the subsequent files.
    • Path and file1, path and file2, path and file3

    You can use the wildcard character "*" in file names.

    If you do not define a path, the folder is used from which you call the utility.

  • -FPath and name of the target file
    Path and name of the target file

    • No path definition is required if the target file should be created in the same folder as the utility

    Existing files of the same name will be overwritten.

Example

Log files with the prefix server are combined in the target file AE.txt.

UCYBLGMX -B -L"C:\AUTOMIC\report\server*" -F"C:\AUTOMIC\report\AE.txt"

See also: